Complete Tire Grooving & Siping Tool Kit, Fit Ideal Groover Siper

Description

Tire grooving and siper kit is great for grooving, cutting and siping tires of all sizes, Heads are made from solid brass for optimal heat transfer, Includes the following heads: (1) #3 (5/32"), (1) #4 (7/32"), (1) #5 (9/32"), (1) #6 (3/8"), (1) #8 (1/2"), and (1) 6-blade siper head, Includes 12 hardened steel blades for each size grooving iron tool head in the kit with replacement blades available, Stainless steel blade retaining hardware holds blade depth measurement setting
Complete Tire Grooving & Siping Tool Kit, Fit Ideal Groover Siper
Sku # 91602097
Mfr. Part # 91602097
Condition
New
Brand
Speedway Motors
Sold
Kit
Details
Notes
Designed to work with the Ideal 125 grooving iron, our grooving iron tool or our Econ-o-siper tool.
Blades are included. Replacement blades are available.
Grooving Iron Replacement Heads and Blades Application Chart (GIF)
Install the head and set the blade to the depth of cut needed before plugging in the groover
Plug the groover in and allow it to warm up for five minutes before you start grooving; our tabletop tire grooving iron stand is suggested for warm up and cool down
Always store tool facing up/handle down in a vertical position while in use to minimize temperature transfer to the handle
Monitor the temperature of the tool and unplug it as needed to regulate the temperature
Tire Grooving Tips
Sanding the mold nubs off the tread before grooving or siping is suggested if the nubs are large; a tire grinder with a 60-grit sanding pad works well for this
Most tires are easier to groove or sipe with the tire mounted and inflated to normal pressures; this is especially true with thin wall racing tires
Complex tread designs can be marked out with a tire marking paint pen or paint stick
Circle Track specific Grooving and Siping Tips
Tire Grooving
Grooves around the circumference of the tire will add side bite and help cool the tire
Grooves across the tread will add forward bite and help warm up the tire
Rear tire grooves and sipes across the tread typically work best when straight across the tread (90 degrees to the circumferential grooves)
Front tire grooves and sipes across the tread typically work better at a slight angle and when viewed from the top of the right front tire the grooves will angle from right front to left rear
Tire Siping
Sipes have a similar effect as grooves and are primarily used to warm up the tire
Sipes around the circumference do not provide much if any cooling effect since they are not open for air to flow through like grooves are
1/8-inch to 3/16-inch sipe depth works well for most tires.
Adding more sipes which are closer together will increase the tire temperature and will add grip as long as the tire is not overheated
If a tire is overheated and blisters the sipes need to be spaced further apart and possibly a shallower depth of cut should be used
More sipes are typically used on front tires to help them heat up and less sipes on rear tires, especially the right rear
Info
Fits Speedway Motors and Ideal Heated Knives brand tool heads
Blades manufactured from hardened steel for long life
Solid brass tool head with steel blade guides
Stainless steel blade retaining hardware
Includes #3, #4, #5, #6, and #8 heads along with our six-blade tire siper head
12 blades for each head size included with replacement blades available
Tire Grooving and Siping Made Easy with Your Choice of Grooving Head and Blades
A heated tire groover is a great tool to have in a racer’s toolbox. Tire grooving and tire siping can be just the advantage you need for your race car’s tires to help you end up in the winner’s circle after a long night of racing on the dirt. Be sure and have the correct tool head and plenty of blades in your race car’s trailer at the ready trackside for grooving tires and siping tires. Now you can make tire grooving and tire siping quick and easy with our six head tire grooving and siping kit. This kit not only includes our most popular grooving head sizes with 12 cutting blades each, but our 6-blade tire siping head as well. We carry a full line of replacement blades for when you need more. Don’t forget you’ll want to install the head and set the blade to the depth of cut needed before plugging in the groover!
Kit Includes:
(1) Tire Siper Tool Head with Multiple Blades
(1) Grooving Iron Head Size 3, 3/16"
(1) Grooving Iron Head Size 4, 1/4"
(1) Grooving Iron Head Size 5, 9/32"
(1) Grooving Iron Head Size 6, 3/8"
(1) Grooving Iron Head Size 8, 1/2"
(12) Tire Grooving Iron Blades Size 3, 3/16"
(12) Tire Grooving Iron Blades Size 4, 1/4"
(12) Tire Grooving Iron Blades Size 5, 5/16"
(12) Tire Grooving Iron Blades Size 6, 3/8"
(12) Tire Grooving Iron Blades Size 8, 1/2"
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Sold in Quantity
Kit
MFG. Part #
91602097
Reviews
Tire Grooving
Rated
by Commanderx2 on May 06, 2021
Summary:
Great products with a wide variety of sizes.
Yes, I recommend this product.
I would buy this again
Rated
by Mike H on May 24, 2020
Summary:
Great for grooving sprint car tires.
Yes, I recommend this product.
Related Items / Suggested Parts
Ideal 125 Tire Groover Mega Kit, Heads, Blades, Multi Siper Tool
Ideal 125 Grooving Iron Tool, Tire Groover, Siping, Siper Cutting
Ideal 125 Tire Groover with 6 Blade Siper Head Kit, Siping Tool
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.