-40%

Studio Technologies Studiocomm 55/56 headphone cue amplifier talkback talent 35

$ 369.59

Availability: 53 in stock
  • Items Included: Monitoring Headphones, Studio Monitor(s)
  • Condition: Perfect working order and nearly perfect cosmetic condition

    Description

    S
    tudio Technologies Studiocomm Model 55 Central Controller and Model 56 Control Console w/ TALKBACK and (2) Talent Amplifiers Model 35
    Included in the auction are the following:
    (1) Model 55 Central Controller
    (1) Model 56 Control Console
    (2) Model 35 Talent amplifiers
    (1) 10' midi cable that connects the Central Controller to the Control Console
    (1) power cable
    NOT included in this listing are the two XLR microphone cables that were used to show that the units function correctly.  Also not included is the awesome vintage mixing console that the items were pictured on.
    This complete system was installed and used in a high end, clean recording studio environment only.  I have never had a single issue with it...not even a scratchy pot.  It is an incredible sounding headphone amplifier system with talkback as well as a 4 source input select with control room monitor outputs and level control as well as an independently selectable dub output.  It works perfectly and is in nearly perfect condition.  The Model 55 Central Controller was always racked and is in perfect condition as is the Central Controller.  The talent amplifiers were always mounted on microphone stands and show the very most minimal signs of wear.  You will hear the difference in quality with this product.  I am only selling it because I have expanded to a larger system for the studio, but this served me very well for years.  It is always a challenge to get signals out to performers, but this system uses studio tie lines (XLR microphone lines) to send signal and power to the talent.  It is such a convenient system.  The build quality is excellent.  Buyer pays all shipping and insurance costs.  Thanks for looking and good luck!
    Product Description:
    The StudioComm 55/56 Stereo Monitoring System with Talkback is designed for studios and audio production facilities that are devoid of flexible monitoring and talkback systems. The Model 55 and Model 56 boast control room monitoring, a meter output, an integrated headphone (cue) system, and a dub (copy) output. The Model 56 provides the command center, with all routing, switching, and level adjustment functions. The Model 55 is the connection point for all audio I/O. Add the functionality of center section of a console to your digital studio with the StudioComm 55/56 Stereo Monitoring System with Talkback.
    StudioComm 55/56 Stereo Monitoring System with Talkback at a Glance:
    Model 56 Control Console
    Control Room and Meter Outputs
    Communications
    Dub Output and Headphone Monitoring
    Model 55 Central Controller
    Four Stereo Line Inputs
    Outputs
    Model 56 Control Console
    The Model 56 provides a small but comfortable command center. All routing, switching, and level adjustment functions are located on the control console. Numerous LEDs provide complete status information. The Model 56's unique configure mode provides extensive flexibility. The Model 56 contains an electret condenser microphone located near the top of the console for convenient wide-range voice pickup.
    Control Room and Meter Outputs
    Any one of the four line inputs can be sent to the control room and meter outputs. For special applications the system can be configured to allow two sources to be selected simultaneously. Level adjustment, mono, and configurable dim are provided for the control room output, while the meter output is only affected by the mono function.
    Communications
    Two communications functions, each with independent level control, are provided: talk to headphones and slate. Talk to headphones interrupts the headphone source and sends voice audio. Slate has two operating modes: sending voice to the dub output, or sending voice to the dub output and the headphone output.
    Dub Output and Headphone Monitoring
    Any one of the four line inputs can be independently sent to the dub and headphone (talent amplifier) outputs. Up to four Model 35 Talent Amplifiers can be connected to the Model 55 using a single 3-pin microphone-type cable; no external power source is needed. The Model 35 is a full-featured headphone amplifier module capable of driving high-impedance headphones (>150 ?). The audio is loud and very clean.
    Model 55 Central Controller
    The Model 55 is the connection point for all audio inputs and outputs, and provides power for the Model 56 and the talent amplifiers. Front panel LEDs indicate the functional status of the Model 56 and the talent amplifiers, and data flow from the Model 56.
    Four Stereo Line Inputs
    The analog outputs of workstations, DAT recorders, optical CD recorders, CD players, cassette decks, or virtually any analog source can be connected to the Model 55's line inputs. The inputs accept balanced or unbalanced signals, and can be individually configured for either -10 dBV or +4 dBu operating levels. Each input can also be configured to accept a stereo or mono signal.
    Outputs
    The Model 55 provides a balanced stereo line level output for driving a power amplifier associated with control room monitor loudspeakers. A balanced stereo line output is provided for dub (copy) use. The dub output can be switched between -10 dBV and +4 dBu operating levels. The meter output provides a stereo line-level signal that "follows" the source(s) selected for the control room. The signal is not affected by the control room level circuitry, but does reflect the monaural function. The meter output is intended to be connected to VU- or PPM-type meter panels that contain series current-limiting resistors or input buffer amplifiers. The headphone (cue) output is designed to feed up to four StudioComm talent amplifier modules. The output is a 3-conductor XLR-type connector that provides power and left and right audio to the talent amplifiers.
    StudioComm 55/56 Stereo Monitoring System with Talkback Features:
    Audio Inputs: 4, stereo
    Connectors: 1/4-inch, 3-conductor phone jacks
    Type: electronically balanced, compatible with balanced or unbalanced signals
    Impedance: 24 k ohms
    Nominal Input Level: -10 dBV or +4 dBu
    Control Room Output: 1, stereo
    Type: electronically balanced
    Maximum Output Level: +27 dBu into 10 k ohms, +26 dBu into 600 ohms
    Frequency Response: 10 Hz-40 kHz +0/-0.5 dB (down 1 dB @ 80 kHz)
    Distortion (THD+N): 0.03%
    S/N Ratio: 87 dB (20 Hz-20 kHz)
    Dub Output: 1, stereo
    Type: electronically balanced
    Nominal Output Level: -10 dBV or +4 dBu
    Maximum Output Level: +27 dBu into 10 k ohms, +26 dBu into 600 ohms
    Frequency Response: 10 Hz-40 kHz +0/-0.5 dB (down 1 dB @ 70 kHz)
    Distortion (THD+N): 0.004%
    S/N Ratio: 92 dB (20 Hz-20 kHz)
    Meter Output: 1, stereo
    Type: unbalanced
    Nominal Output Level: +4 dBu
    Maximum Output Level: +21 dBu into 10 k ohms
    Frequency Response: 10 Hz-40 kHz +0/-0.5 dB (down 1 dB @ 70 kHz)
    Distortion (THD+N): 0.004%
    S/N Ratio: 92 dB (20 Hz-20 kHz)
    Talent Amplifier Output: provides power and audio signals for up to four Model 35 Talent Amplifiers
    Add the functionality of a center console section to your setup with the StudioComm 55/56 Stereo Monitoring System with Talkback!
    Tech Specs
    Number of Input Channels
    4
    Number of Output Channels
    3
    Analog Inputs
    8 x TRS
    Analog Outputs
    6 x TRS
    Digital Inputs
    No Digital Input
    Digital Outputs
    No Digital Output
    Headphones
    No Headphones
    Talkback
    Yes
    Form
    Rackmount
    Height
    1.75
    Depth
    8.75"
    Width
    19"
    Weight
    8.5 lbs.
    The Model 35 Talent Amplifier is a full-featured headphone amplifier (cue) module that drives high-impedance headphones (>150 ohms). The audio is loud and very clean. Up to four Model 35s can be connected to a Model 55 Central Controller Central Controller using a single 3-pin microphone-type cable — no external power source is needed.
    Studio Technologies Model 35 Features:
    Load: intended for connection to one or two pairs of headphones with total impedance of 75 ohms or greater
    Maximum Output Voltage: 16 V peak-to-peak into 150 ohms @ 1% THD+Noise
    Distortion (THD+N): 0.03%
    Frequency Response: 20 Hz-20 kHz ±0.5 dB
    Tech Specs
    Input Channels
    1
    Output Channels
    2
    Analog Inputs
    1 x XLR
    Analog Outputs
    2 x 1/4" Headphone Outputs, 1 x XLR Line Out
    Digital Inputs
    No Digital Inputs
    Digital Outputs
    No Digital Outputs
    Controls per Channel
    Volume
    Form Factor
    Desktop
    Height
    2"
    Depth
    5.3"
    Width
    4.2"
    Weight
    0.8 lbs.